0

Outlet

Inventure Materials Bundle

Outlet

Inventure Materials Bundle

Zortrax Inventure 3D printer Materials Bundle.

This bundle includes:

  • Inventure 3D printer
  • DSS Station
  • 42 Z-PLA Cartridges
  • 23 Z-PETG Cartridges
  • 1 Z-SUPPORT Premium
  • A pair of spool holders

Zortrax Inventure features

  • Dual-extrusion
  • Single-extrusion
  • 3D prints high-temperature ABS-based filaments with PVA soluble support
  • Enclosed, heated printing chamber
  • Built-in HEPA filter
  • External filaments

Zortrax DSS features

  • Removes water-soluble support structures
  • Easy to set up
  • Works with all PVA water-soluble filaments
  • No additional solvents needed

Availability: In Stock

3,490.20 USD

4,986.00 USD

Choose plug type*:
Quantity:
Add to Wish List
Shipping weight: 94.90kg

Description

3D printing with dual and single extrusion

The recently upgraded Zortrax Inventure 3D printer supports both single and dual-extrusion modes. Single-extrusion works by printing both supports and the model with the same filament. In the dual-extrusion mode, the printer prints the model and water-soluble support structures out of separate materials.

External materials support

Nearly all filaments available on the market are fully supported. The Inventure is compatible with external and dedicated filaments available on standard spools and smart cartridges.

Heated printing chamber

Enclosed, heated printing chamber ensures the printing process is performed in a controlled environment. Warping of ABS-based materials is significantly reduced due to sustained, high temperatures in the chamber and optimal cooling rate.

Specification

Device

Build volume
135 x 135 x 130 mm (5.3 x 5.3 x 5.1 in)
Material diameter
1,75 mm (0.069 in)
Nozzle diameter
0,4 mm (0.016 in)
Extruder
Dual, printing with model and support material
Extrusion
Dual and single
Hotend
Dual
Material detection sensor
Yes (for filaments in cartridge only)
Chip with information about material (type, color, consumption)
Yes (for filaments in cartridge only)
HEPA filter
Yes
Connectivity
SD card (included)

Software

Software bundle
Z-SUITE
Supported file types
.stl, .obj, .dxf, .3mf
Supported operating systems
Mac OS X (up to Mojave version) / Windows 7 and newer versions

Filaments

Dedicated for single extrusion
Z-NYLON, Z-ULTRAT, Z-PETG, Z-GLASS, Z-PLA
Dedicated for dual extrusion
Z-PETG, Z-PLA, Z-ULTRAT Plus, Z-SUPPORT Premium
External filaments
Applicable
Support
Mechanically removed – printed with the same material as the model. Water-soluble – printed with a different material than the model
Filament container
Cartridge or spool
Filament diameter
1.75 mm (0.069 in)

Printing

Technology
LPD Plus (Layer Plastic Deposition Plus) – advanced technology depositing melted thermoplastics with dissolvable support structures
Layer resolution
150-200 microns
Minimal wall thickness
400 microns
Platform levelling
Automatic measurement of platform points’ height

Temperature

Heated chamber
Yes
Ambient operation temperature
15-30°C (59-86°F)
Storage temperature
0-35°C (32-95°F)

Electrical

AC Input
AC Input 110V~4A50/60Hz
Maximum power consumption
300 W

In the box

3D Printer, DSS Station, 42x Z-PLA Cartridges, 23x Z-PETG Cartridges, 1x Z-SUPPORT Premium, 5 build trays, Starter Kit, 2x Spool holders