0

3D Printers

Zortrax Inventure & DSS Pack

3D Printers

Zortrax Inventure & DSS Pack

A dual-extrusion 3D printer with an enclosed, heated build chamber.

Zortrax Inventure features

  • Dual-extrusion
  • 3D prints high-temperature ABS-based filaments with PVA soluble support
  • Enclosed, heated printing chamber
  • Built-in HEPA filter

Zortrax DSS features

  • Removes water-soluble support structures
  • Easy to set up
  • Works with all PVA water-soluble filaments
  • No additional solvents needed
Availability: In Stock
2,490.00 USD
Shipping, duties and tariffs not included.
Choose plug type*:
Quantity:
Add to Wish List
Delivery: 7 business days
Shipping weight: 35.50kg

Description

3D printing with dual and single extrusion

In the dual-extrusion mode, Zortrax Inventure prints with two materials: one for the model, and one for water-soluble support structures. In the single-extrusion mode, the printer works with one filament to print both supports and the model.

External materials support

Dedicated filaments for Zortrax Inventure are available in smart cartridges identify the type of material inside and measure how much of the filament is left. The printer also supports third-party filaments available on standard spools.

Heated printing chamber
Enclosed, heated printing chamber ensures the printing process is performed in a controlled environment. Warping of ABS-based materials is significantly reduced due to sustained, high temperatures in the chamber and optimal cooling rate.

Specification

Device

Build volume
135 x 135 x 130 mm (5.3 x 5.3 x 5.1 in)
Material diameter
1,75 mm (0.069 in)
Nozzle diameter
0,4 mm (0.016 in)
Extruder
Dual, printing with model and support material
Extrusion
Dual and single
Hotend
Dual
Material detection sensor
Yes (for filaments in cartridge only)
Chip with information about material (type, color, consumption)
Yes (for filaments in cartridge only)
HEPA filter
Yes
Connectivity
SD card (included)

Software

Software bundle
Z-SUITE
Supported file types
.stl, .obj, .dxf, .3mf
Supported operating systems
Mac OS X (up to Mojave version) / Windows 7 and newer versions

Filaments

Dedicated for single extrusion
Z-NYLON, Z-ULTRAT, Z-PETG, Z-GLASS, Z-PLA
Dedicated for dual extrusion
Z-PETG, Z-PLA, Z-ULTRAT Plus, Z-SUPPORT Premium
External filaments
Applicable
Support
Mechanically removed – printed with the same material as the model. Water-soluble – printed with a different material than the model
Filament container
Cartridge or spool
Filament diameter
1.75 mm (0.069 in)

Printing

Technology
LPD Plus (Layer Plastic Deposition Plus) – advanced technology depositing melted thermoplastics with dissolvable support structures
Layer resolution
150-200 microns
Minimal wall thickness
400 microns
Platform levelling
Automatic measurement of platform points’ height

Temperature

Heated chamber
Yes
Ambient operation temperature
15-30°C (59-86°F)
Storage temperature
0-35°C (32-95°F)

Electrical

AC Input
AC Input 110V~4A50/60Hz
Maximum power consumption
300 W

In the box

3D Printer, Z-PETG, Z-SUPPORT Premium, 5 build trays, Starter Kit, 2x Spool holders

* The weight includes: the device with the build tray and the power cable installed. It does not contain the cartridges with the materials.